A cleaner house, outside
Dirt, mildew and algae build up on siding year after year. We wash the whole exterior with pressure matched to the material, so the house looks fresh on its own or is ready for paint.
The work
What house washing covers
- 01
Check the siding
Vinyl, wood, fiber cement and brick tolerate different pressure, so we identify the material and test a small area first.
- 02
Protect what is around
Plants are wetted down, outlets and light fixtures are shielded and windows are checked before we wash.
- 03
Pre-treat growth
Mildew and algae get a cleaning solution that works before rinsing, which lifts what pressure alone would miss.
- 04
Wash top to bottom
We work from the top down so dirty water never runs over a clean section.
- 05
Rinse and review
A final rinse, then a walk around the house with you to check the result.
Set expectations
What your price includes
- Washing the siding and trim we agree on
- Pre-treating mildew and algae
- Protecting plants, fixtures and outlets
- A final rinse and clean-up
Quoted separately
These are real costs we agree with you before they happen, never surprises on the final bill.
- Washing very high areas that need scaffolding
- Rust, oil or paint stain removal
- Repairing gaps, rot or failed caulk found while washing
- Painting or sealing afterward
Price
Know the price before we knock
| Job | Typical range |
|---|---|
| House wash, one story (about 1,500 sq ft) | $300 to $700 whole house |
| House wash, two stories (about 2,500 sq ft) | $500 to $1,200 whole house |
| Add trim, shutters and doors | $100 to $300 per project |
Typical ranges for homes in New York and Connecticut. Your quote confirms the real price once we see the space.
Your walkthrough estimate
- House wash, one story (about 1,500 sq ft)$300 to $700
- House wash, two stories (about 2,500 sq ft)$500 to $1,200
- Add trim, shutters and doors$100 to $300
Project total$900 to $2,200
After the video walkthrough you get one clear number with what is included and what is quoted separately.
What moves the number
Why two projects cost different amounts
- Size and stories
- More surface and more height mean more time, and a three-story house takes more than a ranch.
- Siding material
- Delicate or older materials need gentler pressure and take longer.
- How much growth
- Heavy mildew or algae takes more treatment time than a light film of dirt.
- Access
- Dense landscaping, steep grades and tight spaces slow the work.
On the walkthrough
What we look for
These are the things that most often change a quote. We spot them on the video call so the price covers them up front.
Gaps around windows and doors
Strong water can be forced behind siding, so we check the seals first and wash gently near them.
Peeling paint
Washing lifts loose paint, so a house with a failing finish may need scraping and painting soon after.
Soft or rotted wood
Damaged boards can break under pressure, so we flag them on the walkthrough.
How it works
Tell us about your project
Answer a few questions about your space, the work you want done and your timing. It only takes a few minutes.
Meet your painter on video
We set up a short video call to see the space and talk through the details. Nobody has to come to your home to give you a price.
We do the painting
You get a clear price, then our crew shows up and does the work.
Questions about house washing
They overlap. House washing often uses lower pressure and a cleaning solution to protect the siding, while pressure washing uses a stronger stream for hard surfaces like concrete. We pick the method that suits your siding.
Almost always. Paint sticks to a clean, dry surface, and washing removes the dirt and mildew that make paint fail. We let the siding dry fully before the first coat goes on.
It depends on shade, trees and moisture around the house. If you see green or black growth or a gray film, it is time. Many homes benefit from a wash every few years.
Who hires us for this
Looking for a painter near you? See where we work.